A board foot is 144 cubic inches: 12 inches wide, 12 inches long, and 1 inch thick, or the same volume in any other shape. For softwood, PS 20 section 2.2 tells you to multiply the nominal thickness in inches by the nominal width in feet by the length in feet. The short form is thickness × width × length ÷ 12, with thickness and width in inches and length in feet.
A worked example, with no calculator
One nominal 2×4, 8 feet long:
- 2 × 4 × 8 / 12 = 5.333 board feet.
- Ten of them: 53.333 board feet.
- At an example price of $0.75 per board foot, 53.333 × 0.75 = $40.00. That price is an example so the arithmetic is exact. Replace it with the number on your receipt.
- The minimum dressed dry size is 1-1/2 × 3-1/2. The wood you can measure is 1.5 × 3.5 × 8 / 12 = 3.5 board feet per stick. The seller's board-foot price uses 5.333, not 3.5.
University of Wisconsin Extension forestry fact sheet 42 uses the same split on a 2×6. Nominal size for the tally. Actual size, 1-1/2 by 5-1/2, when you want the real volume. Their 10-foot example comes out to 6.875 board feet of actual wood. Check: 1.5 × 5.5 × 10 / 12 = 6.875.
One more rule, and it only matters under 1 inch thick. The Softwood Lumber Research, Promotion, Consumer Education and Industry Information Order, 7 CFR 1217.4, counts any nominal thickness under 1 inch as 1 inch. A 1/2 × 6 × 8 is 2 board feet by the plain PS 20 multiplication (0.5 × 6 × 8 / 12) and 4 board feet if the checkoff rule is the one on the invoice. Read the invoice.
Calculator
The dressed volume uses the PS 20 minimum dry size for the common labels in the buttons. It is a minimum, not a promise that your board is that exact size. Hardwood sold rough in quarters (4/4 means 1 inch rough) is often priced on the rough thickness, which you type in as the nominal thickness. A planed 4/4 board is usually under 1 inch. The yard may still have charged you for the 4/4. Ask which thickness is on the bill.
What the plans on this site tally
- Bookshelf: two 1×10 × 8 foot boards, 13.33 nominal board feet.
- Workbench: four 2×4 × 8 foot studs, 21.33 nominal board feet, plus one sheet of plywood sold by the sheet.
- Planter and step stool: the shopping lists give the tally of the sticks, not of the offcuts.
Questions
Do I use nominal or actual size?
Use nominal size when the price is per board foot of softwood, which is the PS 20 tally and the usual hardwood-yard habit of charging on the size before the board is planed. Use the dressed size only when you want the volume of the wood you can touch. The two answers are not interchangeable. A dry 2×4×8 is 5.333 nominal board feet and 3.5 board feet of dressed wood.
Why is my 1×10 not 10 inches wide?
Because 10 is the nominal label. The minimum dressed dry width in PS 20 Table 3 is 9-1/4. The size chart is on the nominal-versus-actual page.
Sources
- NIST PS 20-25, section 2.2. Board feet equal nominal thickness in inches times nominal width in feet times length in feet.
- 7 CFR 1217.4. Defines a board foot, and counts softwood under 1 inch nominal thickness as 1 inch.
- University of Wisconsin Extension, Forestry Fact Sheet 42. Nominal tally versus actual volume. The 2×6 example uses 1-1/2 by 5-1/2 for the real volume.
- TimberTinker App Store listing. Cost by the board foot and by the sheet.
Pages and prices were checked November 19, 2026. A store price can change, and a support page can be revised. The link is the record.