LUMBER SIZES

Nominal size, and the board you measure.

A 2×4 is 1-1/2 by 3-1/2 when it is dry. The chart gives the minimum dressed size, the green size, and the cedar exception.

The number on a softwood board is a label, not a measurement. PS 20-25 calls it the nominal size, and it says the nominal size is greater than the dressed size. The sentence in section 2.16 uses a dry 2×4 as the example: surfaced to 1-1/2 by 3-1/2 inches. Table 3 is the rest of the chart. The numbers below are minimum dressed sizes. A board can be a little thicker and still pass. It is not supposed to be thinner.

Common labels

Combined from PS 20-25 Table 3. Thickness column and width column apply to each other. Dry is 19 percent moisture or less. Green is over 19 percent, for stock under nominal 5 inches.
NominalMinimum dressed, dryMinimum dressed, green
1×23/4 × 1-1/225/32 × 1-9/16
1×33/4 × 2-1/225/32 × 2-9/16
1×43/4 × 3-1/225/32 × 3-9/16
1×63/4 × 5-1/225/32 × 5-5/8
1×83/4 × 7-1/425/32 × 7-1/2
1×103/4 × 9-1/425/32 × 9-1/2
1×123/4 × 11-1/425/32 × 11-1/2
5/4 × 61 × 5-1/21-1/32 × 5-5/8
2×21-1/2 × 1-1/21-9/16 × 1-9/16
2×31-1/2 × 2-1/21-9/16 × 2-9/16
2×41-1/2 × 3-1/21-9/16 × 3-9/16
2×61-1/2 × 5-1/21-9/16 × 5-5/8
2×81-1/2 × 7-1/41-9/16 × 7-1/2
2×101-1/2 × 9-1/41-9/16 × 9-1/2
2×121-1/2 × 11-1/41-9/16 × 11-1/2
4×43-1/2 × 3-1/23-9/16 × 3-9/16

How to read a row. A dry 1×10 is at least 3/4 thick and 9-1/4 wide. A dry 5/4 × 6, the usual decking label, is at least 1 inch thick and 5-1/2 wide, because nominal 1-1/4 dresses to 1 inch and nominal 6 dresses to 5-1/2. A dry 4×4 is at least 3-1/2 by 3-1/2. Timbers, nominal 5 inches and thicker, are sized by a different row of Table 3 and are not in this chart.

Cedar, redwood, and the green column

Table 5 replaces the green widths for redwood, western red cedar, and northern white cedar. The dry column does not change. Green widths for those three: nominal 4 is 3-9/16, 6 is 5-9/16, 8 is 7-3/8, 10 is 9-3/8, and 12 is 11-3/8. A green cedar 1×6 can be 5-9/16 wide instead of the 5-5/8 in the general green column. The planter is written for dry cedar. If the stamp says S-GRN, measure.

Section 6.2.6 is the stamp key. S-GRN means surfaced green. S-DRY means surfaced dry. KD means kiln dried to 19 percent or less at the time it was surfaced. The stamp is on the board. The shelf tag is not the stamp.

What this does to a cut list

The bookshelf, workbench, and step stool use the dry column. If your 2×4 measures 1-9/16 by 3-9/16, it is a green size, and the bench joints that were added as 1-1/2 and 3-1/2 will open up. Recut the rails from the measurement, not from the label.

Board feet do not use this chart. The tally uses the nominal label. A dry 2×4×8 is still 5.333 board feet at the yard, even though the stick is 1-1/2 by 3-1/2. That arithmetic is on the calculator.

Plywood is a different system

A panel does not have a nominal 2×4 style label. Structural plywood is stamped with a performance category. A sheet a store calls 3/4 inch is often stamped 23/32. Georgia-Pacific's Plytanium sanded panels list 0.703 inch for the 23/32 category and a length and width tolerance of plus 0, minus 1/16 inch on a stated 4-foot or 8-foot size. Measure the sheet before you lock a leg length to it. The workbench page does that subtraction in one line: leg equals 34 minus the top you measured.

Questions

Is a 2×4 actually 2 by 4?

No. PS 20 calls 2×4 the nominal size. Dry, surfaced, the minimum dressed size is 1-1/2 by 3-1/2 inches. Green, the minimum dressed size is 1-9/16 by 3-9/16. Dry means 19 percent moisture or less for lumber under nominal 5 inches.

Why do 1×8 and wider lose more width?

In Table 3, dry widths through 7 inches are 1/2 inch under the nominal width. From 8 inches up, the dry minimum is 3/4 inch under. A 1×6 is 5-1/2. A 1×8 is 7-1/4, not 7-1/2.

Where TimberTinker fits. The listing says the app uses real lumber and sheet-good sizes, from 2×4s to 3/4 inch plywood, and that you can edit any board's exact size. The chart on this page is the standard those labels refer to. If a board in your hand disagrees with the chart, type the measurement you took. TimberTinker: Woodworking 3D is free to download on the U.S. App Store. The listing says the first 3 projects are free, then Premium. On the U.S. listing checked November 19, 2026, the in-app purchases are named Unlimited Access at $5.99, Unlimited Access at $12.99, and timbertinker at $49.99. The listing does not say how long each purchase lasts. It does say the app uses real lumber sizes from 2×4s to 3/4 inch plywood, writes a cut list, and estimates cost by the board foot and by the sheet. Redraw this piece in the app and read its cut list as a second check. Measure the board in your hand before you cut. This page has not compared the app's output to these numbers.

Sources

Pages and prices were checked November 19, 2026. A store price can change, and a support page can be revised. The link is the record.